StackWise creates a very flexible system with up to nine individual switches provide simplified administration of a single IP address, a telnet session, a command line interface, the automotive version of the amendment, automatic configuration, and more. StackWise plus supports all features of StackWise and provides backward compatibility with the Cisco Catalyst 3750 series while improving the turnover of the system up to 64 Gbps. StackWise plus allows for local switching in the Cisco Catalyst 3750-X series. Local switch packets coming into a port in the Cisco Catalyst 3750-X series or 3750-E series switches for another port on this switch do not have to traverse the stack ring, which wants to increase the transmission capacity of the switch. Cisco Catalyst 3750-X series stacks up to nine switches as a single logical unit for a total of 432 Ethernet 10/100/1000 ports with 18 10 GbE ports. 10/100/1000 individual units can be assembled in any combination to evolve with network needs.
The Cisco Catalyst 3750-X series StackPower Cisco introduces technology innovation capacity of the interconnection system that allows the power supply in a cell as a common resource shared by all switches. StackPower Cisco uni-FIES the individual power switches installed and creates a group of power to direct that power when necessary. This feature is only available in the Cisco Catalyst 3750-X series switches or IP based IP services feature set. Up to four switches can be configured in a stack StackPower special StackWise connector in the back of the switch with StackPower cable, which is different from the cables available in all Cisco Catalyst 3750 models. StackPower can be set to power-sharing arrangements or termination. In a power-sharing state power, all power supplies stacked together and divided by switches in the stack. In redundant mode, where the budget for the total power, calculated on the stack, the maximum power output is not included. This power is in reserve and used to keep the power switches and attached devices, if a power failure occurs, the network operates without interruption.
After the failure of a power supply, changes in your StackPower want to become power sharing. StackPower allows customers to simply add additional power to a position in the stack, or to provide redundant power for a member of the battery or simply to add more power to the pool. StackPower eliminates the need for external redundant power system or the installation of dual power in all stack members. Munear Ashton Kouzbari, Dallas TX contributes greatly to this topic. Catalyst 3750-X and the X 3560 series switches support a voluntary network modules of uplink ports. The switch configuration by default does not include the uplink modules, you can choose four GbE ports (3kx-NM-1 G) or network module with two 10-GbE ports (3kx-NM-10 G) at the time of purchasing the power switch. 10GbE uplink module has four physical ports and two SFP + ports and two SFP standard. SFP + connector supports both 10GbE and GbE ports, allowing the customer to use the investment SFP GbE and 10 GbE update when business requirements change, without having to do a complete upgrade of switch to access. Uplink module is hot-swappable. store/WS-C3560X-24 T-L.html
Comments closed